HP 54540 Series - Page 7

Contents
3 Testing Performance
Testing Interval 3-2
Equipment Required 3-2
Self-Test Verification 3-2
Test Record 3-3
Operating Hints 3-3
Keystroke Conventions 3-3
Specifications 3-4
Performance Test Procedures 3-4
To test the de Calibrator 3-4
To test input resistance 3-5
To test voltage measurement accuracy 3-6
To test offset accuracy 3-8
To test bandwidth 3-9
To test time measurement accuracy 3-11
To test trigger sensitivity 3-15
To test the oscillator output 3~18
4 Calibrating and Adjusting
Equipment Required 4-2
Calibration Interval 4-2
Cal RAM Checksum Error 4-2
Operating Hints 4-2
Key-Down Powerup 4-3
Loading New Software 4-3
Calibration and Adjustment Procedures 4-3
Power Supply 4-4
To adjust the power supply 4-4
Main Assembly 4-5
To load the default calibration 4-5
To adjust the high-frequency pulse response 4-6
To calibrate the firmware 4-9
CRT Monitor 4-11
To adjust the display 4-11
Contents-2