HP 5890 Series II - Typical Switch Settings for EPC;MPC Pcbs

SVC 3-18
INLET B1 DOWN
INLET B0 UP
INLET A1 DOWN
INLET A0 DOWN
INLET B1 DOWN
INLET B0 UP
MODE B UP
EPC B UP
INLET A 1 DOWN
INLET A0 DOWN
MODE A DOWN
EPC A DOWN
--------DON’T CARE
CHOICE OF PID CONSTANTS
FORWARD PRESSURE/BACK PRESSURE
ENABLE/DISABLE EPC
CHOICE OF PID CONSTANTS
TYPICAL SWITCH SETTINGS FOR EPC/MPC PCBs
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com