HP 5900 Installation Guide

12
Each of the HP 5920AF-24XG and 5920AF-24XG TAA switches has one primary grounding point (with
a grounding sign) and one auxiliary grounding point, and each of the HP 5900AF-48XG-4QSFP+,
5900AF-48XG-4QSFP+ TAA, 5900AF-48XGT-4QSFP+, and 5900AF-48G-4XG-2QSFP+ switches has
one primary grounding point (with a grounding sign) and two auxiliary grounding points. Use the
primary grounding point whenever possible. If the primary grounding point fails or is not suitable for the
installation site, use one of the auxiliary grounding points.
Figure 17 Identifying the mounting and grounding positions of the HP 5920AF-24XG/5920AF-24XG
TAA
(1) Rear mountin
g
position (2) Primary
g
roundin
g
point
(3) Auxiliary
g
roundin
g
point 1 (4) Front mountin
g
position
Figure 18 Identifying the mounting and grounding positions of the HP
5900AF-48XG-4QSFP+/5900AF-48XG-4QSFP+ TAA/5900AF-48XGT-4QSFP+
(1)
A
uxiliary
g
roundin
g
point 2 (2) Rear mountin
g
position
(3) Primary grounding point (4) Auxiliary grounding point 1
(5) Front mountin
g
position
1 2 3 4 5

HP 5900 Specifications

General

Model	HP 5900
Rack Mountable	Yes
MAC Address Table Size	128K
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, IS-IS, IGMP
Remote Management Protocol	SNMP, CLI
Features	Quality of Service (QoS), Jumbo Frames support, IPv4 support, IPv6 support
Operating Temperature	0 °C to 45 °C
Operating Humidity	10% to 90% non-condensing
Power Supply	Internal power supply - hot-plug / redundant