HP 6100 - Physical Layout of the Storage System

2. From the Configure Array Managers window, click Add to add connection information for the
Command View EVA servers managing your EVA disk arrays.
3. In the Add Array Manager window, enter the storage manager addresses, usernames, and
passwords in the entry fields without spaces and separating each entry with a semicolon (;).
For example:
Storage Manager Address - address1;address2
Username - username1;username2
Password - password1;password2
NOTE:
With this release, HP EVA Virtualization Adapter limits the number of Command View EVA
management servers that can be configured to two (one in each data center).
From the Manager Type menu, select HP StorageWorks Enterprise Virtual Array. Then enter the
address and login credentials used for HP Command View EVA and click Connect.
After the connection completes, all HP EVA disk arrays managed by the HP Command View EVA
server are displayed.
Configuring SRM and the HP EVA disk array16