3 Installing and removing HP EVA
Virtualization Adapter
This chapter explains how to install and configure HP EVA Virtualization Adapter.
NOTE:
You do not need to remove the previous HP EVA Virtualization Adapter when upgrading to a newer
version.
IMPORTANT:
A successful installation depends on using compatible versions of the OS and all installed software.
See
HP EVA Virtualization Adapter release notes
for version requirements.
Installation directory
Depending on the version of SRM, HP EVA Virtualization Adapter is installed in the following (default)
directoy:
• For SRM 1.0
C:\Program Files\VMware\VMware Site Recovery Manager\scripts\SAN\HP
StorageWorks EVA Virtualization Adapter
• For SRM 4.0
C:\Program Files\VMware\VMware vCenter Site Recovery Manager\scripts\
SAN\SAN\HP StorageWorks EVA Virtualization Adapter
Installation prerequisites
To install HP EVA Virtualization Adapter, you need administrator privileges, and VMware Site Recovery
Manager must already be installed on the server.
Installing HP EVA Virtualization Adapter
HP EVA Virtualization Adapter is installed using an executable (setup.exe).
EVA Virtualization Adapter administrator guide 21
To Next Page
Loading...
Need help?
General