54 hp photosmart 720 user’s manual
My image is
blurry.
Your subject
was too close
to the camera
lens.
Do not try to get closer than the
camera’s minimum focus range
(see Appendix C: Specifications
on page 77).
You moved the
camera while
you took the
picture.
Hold the camera steady as you
press the Shutter button or use a
tripod.
The light is low
and the flash is
turned off.
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or
use the flash.
My image is
too dark.
There was not
enough light.
Wait for natural lighting
conditions to improve, add
indirect lighting, or adjust the EV
compensation.
The flash was
on, but the
subject was
too far away.
Make sure your subject is within
the flash working distance (see
Appendix C: Specifications on
page 77) or try turning flash off
(will require longer exposure).
A light shone
behind the
subject.
Use the Flash On setting to
brighten the subject when there
is a bright light such as the sun
or a window behind your
subject.
Your finger
blocked the
flash.
Be sure to move your fingers
away from the flash when you
take a picture.
Problem Possible cause Solution
To Next Page
Loading...
Need help?
General
