5-66
Hardkey/Softkey Reference
Analyzer Functions
is used to terminate basic units: dB, dBm, Hz, dB/GHz,
degrees, or seconds. It may also be used to terminate
unitless entries such as averaging factor.
toggles the PLOTTER/PRINTER serial port data transmit
control mode between the Xon-Xoff protocol handshake
and the DTR-DSR (data terminal ready-data set ready)
hardwire handshake.
converts reflection data to its equivalent admittance
values.
converts transmission data to its equivalent admittance
values.
converts reflection data to its equivalent impedance
values.
converts transmission data to its equivalent impedance
values.
x1
To Next Page
Loading...
