7-6
Options and Accessories
Accessories Available
• HP 85134F set, flexible: 3.5-mm to 2.4-mm, 53-cm (21-in) each.
For the HP 8722ET/ES.
Test-Port Cables: 7mm
• HP 85132D set, semi-rigid: 7-mm to 3.5-mm, 53-cm (21-in) each.
For the HP 8719ET/ES or HP 8720ET/ES.
• HP 85132E single, flexible: 7-mm to 3.5-mm, 96-cm (38-in).
For the HP 8719ET/ES or HP 8720ET/ES.
• HP 85132F set, flexible: 7-mm to 3.5-mm, 53-cm (21-in) each.
For the HP 8719ET/ES or HP 8720ET/ES.
• HP 85135C single, semi-rigid: 7-mm to 2.4-mm, 81-cm (32-in).
For the HP 8722ET/ES.
• HP 85135D set, semi-rigid: 7-mm to 2.4-mm, 53-cm (21-in) each.
For the HP 8722ET/ES.
• HP 85135E single, flexible: 7-mm to 2.4-mm, 96-cm (38-in).
For the HP 8722ET/ES.
• HP 85135F set, flexible: 7-mm to 2.4-mm, 53-cm (21-in) each.
For the HP 8722ET/ES.
Calibration Kits
Choose a kit for each connector type to be used.
• HP 85052B 3.5-mm standard calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, sliding loads, open and short circuits, and adapters for both
connector sexes for use with 3.5-mm test-port cables.
— Option K11
PSC-3.5 slotless female center contact repair kit.
• HP 85052C 3.5-mm LTRA calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, open and short circuits, TRL lines, and adapters for both
connector sexes for use with 3.5-mm test-port cables.
• HP 85052D 3.5-mm economy calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, open and short circuits, and adapters for both connector sexes for
use with 3.5-mm test-port cables.
• HP 85033D 3.5-mm RF calibration kit (DC to 6 GHz)
Contains fixed loads, open and short circuits, and 3.5-mm to 7-mm adapters for use with
the HP 8753 network analyzer.
— Option 001
Deletes 3.5-mm to 7mm adapters. Recommended if the kit will not be used with the
HP 8753 network analyzer.
• HP 85050B 7-mm standard calibration kit (0.045 to 18 GHz)
Contains fixed loads, open and short circuits, and terminations.
To Next Page
Loading...
