8-5
Preset State and Memory Allocation
Preset State
Conversion Off
Format Log Magnitude (all inputs)
Display Data
Color Selections
Same as before
Dual Channel Off
Active Channel Channel 1
Auxiliary Channel Disabled
Frequency Blank Disabled
Retrace Power Standard
Test Set Switch (ES) continuous
Test Set Switch (Opt. 007 or 085) hold
Split Display 2X
Intensity 100%
Beeper: Done On
Beeper: Warning Off
D2/D1 to D2 Off
Title Channel 1 = [hp]
Channel 2 = Empty
IF Bandwidth 3000 Hz
IF Averaging Factor 16; Off
Smoothing Aperture 1% SPAN; Off
Phase Offset 0 Degrees
Electrical Delay 0 ns
Scale/Division 10 dB/Division
Table 8-1 Preset Conditions
Preset Conditions Preset Value
Preset
To Next Page
Loading...
