2-18
HP 8719/20/22ET Specifications and Characteristics
Instrument Specifications
Table 2-14 Test Port Input
HP 8719/20/22ET Test Port Input
Description
Supplemental Information
System Bandwidths
3000 Hz 10 Hz
Trace Noise
a
a. Trace noise is defined for a transmission measurement in CW mode, using a
“through” cable having 0 dB loss, and a short for a reflection measurement,
with the source set to the lesser of the maximum source output or the
maximum receiver input, and no averaging. Trace noise is defined as the
variation of a high level trace due to noise.
Magnitude
0.05 GHz to 13.5 GHz < 0.03 dB rms, typ. < 0.003 dB rms, typ.
13.5 GHz to 20 GHz < 0.04 dB rms, typ. < 0.004 dB rms, typ.
20 GHz to 40 GHz < 0.15 dB rms, typ. < 0.015 dB rms, typ.
Phase
0.05 GHz to 13.5 GHz < 0.3° rms, typ. < 0.03° rms, typ.
13.5 GHz to 20 GHz < 0.4° rms, typ. < 0.04° rms, typ.
20 GHz to 40 GHz < 1.5° rms, typ. < 0.15° rms, typ.
To Next Page
Loading...
