HP 8920B - Page 548

548
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL BIT Screen
The contents of twenty nine different messages can be modified from this screen. The
message to be modified is selected using the Set Message field. The twenty nine
messages whose contents can be modified are:
• Forward Control Channel Messages for Paging, Origination, Order Confirmation, and
orders.
• "SPC WORD1 Message Fields" on page 561
• "SPC WORD2 Message Fields" on page 563
• "ACCESS Message Fields" on page 566
• "REG INC Message Fields" on page 568
• "REG ID Message Fields" on page 570
• "C-FILMESS Message Fields" on page 572
• "MS WORD1 Message Fields" on page 575
• "MSMessOrd Message Fields" on page 576
• "MS IntVCh Message Fields" on page 578
• "FVC O Mes Message Fields" on page 580
• "FVC V Mes Message Fields" on page 582
• Forward Control Channel Authentication Messages.
• "RandChalA Message Fields" on page 584
• "RandChalB Message Fields" on page 586
• "RAND SSD1 Message Fields" on page 588
• "RAND SSD2 Message Fields" in chapter 8
• "RAND SSD3 Message Fields" in chapter 8
• "BSChalCon Message Fields" in chapter 8
"UniqChOrd Message Fields" in chapter 8d
• Forward Voice Channel Authentication Messages.
• "FVC SSD1 Message Fields" on page 595
• "FVC SSD2 Message Fields" on page 596
• "FVC SSD3 Message Fields" on page 597
• "FVCBSCon Message Fields" on page 598
• "FVCUniqCh Message Fields" on page 599