EasyManuals Logo
Home>HP>Server>AlphaServer ES80

HP AlphaServer ES80 Upgrade Manual

HP AlphaServer ES80
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Chapter 1
Overview
The AlphaServer ES47 system is a member of the family of high-performance
ES47/ES80/GS1280 server platforms designed for enterprise-level applications. The
ES47 system is built with 2P drawers; a maximum of two 2P drawers can be
connected to create a 4P system with up to 16 Gbytes of memory.
ES47 model numbers are based on the number of CPUs in a system.
A Model 2 is a one-drawer system (with 2 CPUs), and a Model 4 is a two-drawer
system (with 4 CPUs).
The ES47 system can be a tower system, or contained in a single rack mount cabinet.
Two upgrades are available: changing from a tower system to a 29”deep rack mount
cabinet, and upgrading from a Model 2 to a Model 4.
This chapter provides an overview of these ES47 upgrades.
Sections include:
System components
Upgrades steps
Check upgrades kits
Upgrade firmware
Shut down system power
CPU Speeds
AlphaServer ES47 Systems can use two different CPUs:
CPU Speed Part Number
1000 MHz 3X-KN73A-xx
1150 MHz 3X-KN73C-xx
CAUTION: Only one type of CPU may run within a given hard partition. A system
may run CPUs of different speeds in different partitions, as long as all the CPUs
within each partition are the same.
Overview 1-1

Table of Contents

Other manuals for HP AlphaServer ES80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP AlphaServer ES80 and is the answer not in the manual?

HP AlphaServer ES80 Specifications

General IconGeneral
BrandHP
ModelAlphaServer ES80
CategoryServer
LanguageEnglish

Related product manuals