HP AlphaServer ES80 Upgrade Manual

1. Remove the screws on the four corners of the disk/CD unit.
X
2. Gently pull the unit out and turn it 90 degrees to the right,
Y
and reinsert it into the space.
3. Replace the screws in the four corners.
Z
4. Reconnect the SCSI cable (if you had to disconnect it).
5. Working from the fan cavity, thread the IDE cable back under components to the I/O
expander board and plug it in.
Prepare the System 2-15

HP AlphaServer ES80 Specifications

General

Brand	HP
Model	AlphaServer ES80
Category	Server
Language	English