HP Aruba 6400 Series

2
1
9. Power-on and verify that the installed power supply units are running properly. A steady green LED on
the front panel of a PSU indicates proper operation. (For more information on LED behavior, see the
latest version of the Monitoring Guide at https://asp.arubanetworks.com/downloads.)
NOTE: The 6400 Series chassis and PSUs do not include a power on/o switch. PSUs are
powered on by connecting the AC power cord at the rear of the chassis, and to an AC power
source.
Install management modules in slots 1 and 2
Skip this task if your management modules are already installed.
3
1 2
4
5
6
7
8
9
10
11
12
Aruba 6405 and 6410 : 1 and 2 Management module slots
Aruba 6405: 3 through 7
Aruba 6410: 3 through 12
Line module slots
Chapter 7 Installing components 71