Table 5-4 Battery description and part number
Description Spare part number
Battery (2 cell, 47 Whr, 6.15 Ahr, Li) L75783-005
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 28).
2. Remove the top cover/keyboard (Top cover/keyboard on page 28).
3. Remove the speakers (Speakers on page 33).
Remove the battery:
▲ Remove the battery.
Reverse this procedure to install the battery.
Sensor board cable
To remove the sensor board cable, use this procedure and illustration.
NOTE: The sensor board cable is included in the Cable Kit, spare part number M44247-001, and includes
double-sided adhesive.
Before removing the sensor board cable, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 28).
2. Remove the top cover/keyboard (Top cover/keyboard on page 28).
3. Disconnect the battery cable from the system board (Speakers on page 33).
Remove the sensor board cable:
ENWW Component replacement procedures 35
To Next Page
Loading...
