Table 2-2 Front-side components and their descriptions (continued)
Component Description
(3) microSD™ memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing
the Chromebox.
2. Insert the card into the memory card reader, and then
press in on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the
memory card reader.
(4) Power button ● When the Chromebox is o, press the button briey to
turn on the Chromebox.
● When the Chromebox is on, press the button briey to
initiate Sleep.
● When the Chromebox is in the Sleep state, press the
button briey to exit Sleep (select products only).
● When the Chromebox is in Hibernation, press the button
briey to exit Hibernation.
IMPORTANT: Pressing and holding down the power button
results in the loss of unsaved information.
If the Chromebox has stopped responding and shutdown
procedures are ineective, press and hold the power button for
at least 10 seconds to turn o the Chromebox.
Rear
Use the illustration and table to identify the components on the rear of the Chromebox.
Table
2-3 Rear-side components and their descriptions
Component Description
(1) RJ-45 (network) jack Connects a network cable.
ENWW Rear 7