Preparation for disassembly
Bottom cover
To remove the bottom cover, use this procedure and illustration.
Table 6-1 Bottom cover description and part number
Description Spare part number
Bottom cover L17258-001
Before removing the bottom cover, prepare the Chromebox for disassembly (Preparation for disassembly
on page 27).
Remove the bottom cover:
1. Position the Chromebox upside down with the rear toward you.
2. Remove the four rubber feet (1).
The rubber feet are available in the Rubber Feet Kit, spare part number L17271-001.
3. Remove the four Phillips M2.5 × 5.0 screws (2) that secure the bottom cover to the Chromebox.
4. Use a case utility tool or similar thin plastic tool (1) to separate the front edge of the bottom cover (2) from
the Chromebox.
ENWW Component replacement procedures 27
To Next Page
Loading...
