2. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do
not touch the components on the memory module. Place it in an electrostatic-safe container.
Reverse this procedure to install a memory module.
System board
To remove the system board, use these procedures and illustrations.
Table
6-8 System board descriptions and part numbers
Description Spare part
number
The system board spare part kit includes the processor, RTC battery, replacement thermal material, a graphics subsystem with UMA
memory, and the Chrome operating system.
Equipped with an Intel Core i7-10610U processor M24721-001
Equipped with an Intel Core i5-10310U processor and 64 GB on-board system memory M25770-001
Equipped with an Intel Core i5-10310U processor M24720-001
Equipped with an Intel Core i3-10110U processor and 64 GB on-board system memory M25769-001
Equipped with an Intel Core i3-10110U processor M24719-001
Equipped with an Intel Pentium 6405U processor and 64 GB on-board system memory M25771-001
Equipped with an Intel Pentium 6405U processor and 32 GB on-board system memory M24722-001
Equipped with an Intel Celeron 5205U processor and 64 GB on-board system memory M25768-001
Equipped with an Intel Celeron 5205U processor and 32 GB on-board system memory M24718-001
Before removing the system board, follow these steps:
ENWW Component replacement procedures 35
To Next Page
Loading...
