Before removing the memory module, follow these steps:
1. Prepare the Chromebox for disassembly (Preparation for disassembly on page 27).
2. Remove the bottom cover (Bottom cover on page 27).
3. Remove the I/O side frame (I/O side frame on page 28).
4. Remove the bottom shield (Bottom shield on page 29).
Remove the memory module:
1. Insert a case utility tool or similar thin, plastic tool into the openings (1) on either side of the memory
module shield and remove the shield (2). The memory module shield is available using spare part number
L17264-001.
NOTE: When installing the memory module shield, be sure that the edges of the shield t securely into
the retention clips (3) built into the system board.
34 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW
To Next Page
Loading...
