Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part
number 446680-001. There are 6 rubber feet in 2 different sizes. The feet attach to the base enclosure
in the locations illustrated below.
Bluetooth module
Description Spare part number
Bluetooth (includes Bluetooth module cable) 446405-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 42).
Remove the Bluetooth® module:
1.
Position the computer with the front toward you.
2. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the Bluetooth module compartment
cover to the computer.
48 Chapter 4 Removal and replacement procedures