Display assembly
Description Spare part number
14.1-inch, WXGA+ display assembly (includes wireless antenna transceivers and cables) 446436-001
14.1-inch, WXGA display assembly (includes wireless antenna transceivers and cables) 446435-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 42).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 52).
6.
Remove the following components:
a.
Keyboard (see
Keyboard on page 57)
b.
Switch cover (see
Switch cover on page 64)
7.
Disconnect the wireless antenna cables from the WWAN module (see
WWAN module
on page 63).
Remove the display assembly:
1.
Turn the computer upside down, with the rear panel toward you.
Component replacement procedures 71