CAUTION: Be sure that the 3 wireless antenna cables routed out of the display right hinge are also
routed and arranged properly. Each antenna cable has a metallic grounding sleeve (1) that must
completely cover the exposed section of cable (2). A piece of metallic grounding tape (3) must be used
to secure the cables to the flat section (4) of the display right hinge. This grounding tape must make contact
with the grounding sleeves.
Failure to follow these routing instructions can result in degradation of the computer's WLAN and WWAN
performance.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 75
To Next Page
Loading...
