HP Compaq dc7100 DT Hardware Reference Guide

2–34 www.hp.com Hardware Reference Guide
Hardware Upgrades
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the HP Web site at
www.hp.com. Click
support & drivers, select Download drivers and software, enter the
model number of the computer, and press
Enter.
Partitioning and Formatting a MultiBay Hard Drive
✎
You must be logged on as an administrator or a member of the
Administrators group in order to complete this procedure.
1. Exit all software applications, shut down the operating system
software, and turn off the computer.
2. Insert the MultiBay hard drive into the MultiBay. Refer to
“Inserting a Drive into the MultiBay” on page 2–33 for more
information.
3. Turn on the computer.
4. Click Start.
5. Right-click My Computer, then click Manage.
6. Click Storage, then double-click Disk Management.
7. Right-click the MultiBay hard drive, then click Partition.
Carefully read and respond to any prompts that appear on the
screen.
Refer to the online Help (click Action > Help) for additional
information.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA