HP Compaq dc7100 DT Hardware Reference Guide

2–32 www.hp.com Hardware Reference Guide
Hardware Upgrades
Removing a Drive from the MultiBay
1. Remove any removable media, such as a compact disc, from the
drive.
2. Before removing an optical or diskette drive, stop the drive using
the Safely Remove Hardware icon on the Windows task bar.
3. If you are not hot-swapping a CD-ROM or diskette drive, exit all
software applications, shut down the operating system software,
and turn off the computer.
4. Release the MultiBay security catch, if it has been engaged. Refer
to “Engaging and Releasing the MultiBay Security Catch” on
page 2–29 for more information.
5. Slide the eject lever down (or towards the left of the computer, if
the computer is in the desktop position) 1 to eject the drive 2
from the MultiBay.
Removing a Drive from the MultiBay (shown with USDT in tower
configuration)

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA