EasyManuals Logo

HP Compaq dc7600 MT Technical Reference Guide

HP Compaq dc7600 MT
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
Technical Reference Guide www.hp.com 8-13
BIOS ROM
Advanced*
*For
advanced
users only
Power-On Options Allows you to set:
POST mode (QuickBoot, FullBoot, or FullBoot every 1-30 days).
POST messages (enable/disable).
F9 prompt (enable/disable). Enabling this feature will display
the text F9=Boot Menu during POST. Disabling this feature
prevents the text from being displayed but pressing F9 will still
access the Shortcut Boot (Order) Menu screen. See Storage >
Boot Order for more information.
F10 prompt (enable/disable). Enabling this feature will display
the text F10=Setup during POST. Disabling this feature
prevents the text from being displayed but pressing F10 will still
access the Setup screen.
F12 prompt (enable/disable). Enabling this feature will display
the text F12=Network Service Boot during POST.
Disabling this feature prevents the text from being displayed but
pressing F12 will still force the system to attempt booting from
the network.
Option ROM* prompt (enable/disable). Enabling this feature
will cause the system to display a message before loading
options ROMs. (This feature is supported on select models only.)
Remote wakeup boot source (remote server/local hard drive).
After Power Loss (off/on/previous state): After power loss, if you
connect your computer to an electric power strip and would like
to turn on power to the computer using the switch on the power
strip, set this option to ON.
If you turn off power to your computer using the switch on a
power strip, you will not be able to use the suspend/sleep feature
or the Remote Management features.
POST Delay (in seconds) (enable/disable). Enabling this feature
will add a user-specified delay to the POST process. This delay
is sometimes needed for hard disks on some PCI cards that spin
up very slowly; so slowly that they are not ready to boot by the
time POST is finished. The POST delay also gives you more time
to press
F10
to enter Computer (F10) Setup.
I/O APIC Mode (enable/disable). Enabling this feature will
allow Microsoft Windows Operating Systems to run optimally.
This feature must be disabled for certain non-Microsoft
Operating Systems to work properly.
Table 8-2
Setup Utility
Heading Option Description
Support for specific Computer Setup options may vary depending on the hardware configuration.

Table of Contents

Other manuals for HP Compaq dc7600 MT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq dc7600 MT and is the answer not in the manual?

HP Compaq dc7600 MT Specifications

General IconGeneral
MemoryUp to 4 GB DDR2 SDRAM
AudioIntegrated High Definition Audio
Expansion Slots1 PCI Express x16, 1 PCI Express x1, 2 PCI
Form FactorMicrotower
ProcessorIntel Pentium 4 or Intel Celeron D
ChipsetIntel 945G Express
Hard Drive40 GB to 160GB SATA
Optical DriveDVD-ROM, DVD+/-RW
GraphicsIntegrated Intel Graphics Media Accelerator 950
NetworkingIntegrated 10/100/1000 Ethernet
PortsSerial, parallel, VGA, audio in/out
Operating SystemWindows XP Professional, Windows XP Home
USB Ports8 USB 2.0 (2 front, 6 rear)

Related product manuals