HP Compaq NX7300 User Manual

Removal and Replacement Procedures
Maintenance and Service Guide 5–13
6. If it is necessary to replace the optical drive bracket, remove
the two Phillips PM2.0×3.0 screws 1 that secure the bracket
to the optical drive.
7. Remove the optical drive bracket 2.
Removing the Optical Drive Bracket
Reverse the above procedure to reassemble and install an
optical drive.

HP Compaq NX7300 Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Operating System	Windows XP Professional
Wireless	802.11a/b/g
RAM	512 MB DDR2 SDRAM
Storage	80GB or 120GB HDD
Display	15.4 inch WXGA (1280x800)
Optical Drive	DVD-ROM
LAN	10/100/1000 Ethernet
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone, microphone
Battery	6-cell Lithium-Ion
Weight	2.7 kg