HP Compaq NX7300 User Manual

5–34 Maintenance and Service Guide
Removal and Replacement Procedures
3. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module board. (The
side of the module opposite the socket rises away from
the computer.)
4. Slide the module away from the socket at an angle 2.
5. Remove the memory module.
✎
Memory modules are designed with a notch 3 to prevent
incorrect installation into the memory module socket.
Removing the Internal Memory Module
Reverse the above procedure to install an internal
memory module.

HP Compaq NX7300 Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Operating System	Windows XP Professional
Wireless	802.11a/b/g
RAM	512 MB DDR2 SDRAM
Storage	80GB or 120GB HDD
Display	15.4 inch WXGA (1280x800)
Optical Drive	DVD-ROM
LAN	10/100/1000 Ethernet
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone, microphone
Battery	6-cell Lithium-Ion
Weight	2.7 kg