HP Compaq NX7300 User Manual

Removal and Replacement Procedures
Maintenance and Service Guide 5–37
5. Turn the computer display-side up with the front toward you.
6. Open the computer as far as possible.
7. Use a flat-bladed screwdriver to lift up the left and right
hinge cover sections of the switch cover 1 to detach it from
the computer.
8. Swing the rear edge of the switch cover 2 up and toward
you.
Releasing the Switch Cover

HP Compaq NX7300 Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Operating System	Windows XP Professional
Wireless	802.11a/b/g
RAM	512 MB DDR2 SDRAM
Storage	80GB or 120GB HDD
Display	15.4 inch WXGA (1280x800)
Optical Drive	DVD-ROM
LAN	10/100/1000 Ethernet
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone, microphone
Battery	6-cell Lithium-Ion
Weight	2.7 kg