Q Menu and Desktop Profile Manager Utility
Software Guide 2–3
Obtaining Information About
System-Defined Items
To display a description of a system-defined Q Menu item or
to test any Q Menu item by executing the item command:
1. Press the Q menu button or select the Q icon in the
system tray.
2. Select the Q Menu Settings item.
3. On the Items to Display On Q Menu list:
❏
To display a description of a system-defined item,
select the item. (A description is displayed in a panel
beneath the list.) Descriptions of user-defined items
cannot be displayed.
❏
To test any item by executing the item command,
select the item, then select the Execute button.
Procedures for using all system-defined items are provided in
“Using a System-Defined Item,” later in this chapter.
Setting Q Menu Preferences
The Q Menu can display up to 30 items. Several system-defined
items are displayed by default. Additional system-defined and
user-defined items can be added. All items, including the default
items, can be removed.
The items on the Q Menu are managed from the Items to Display
On Q Menu list.
Accessing the Items to Display on Q Menu List
The Items to Display on Q Menu list can be accessed at any time
by using either of the following procedures:
■
Press the Q menu button or select the Q icon in the system
tray, then select the Q Menu Settings item.
■
Select Start > Control Panel > Other Control Panel Options >
Q Menu Settings.
280125-001.book!!Page!3!!Sunday,!August!25,!2002!!3:51!PM
To Next Page
Loading...
Need help?
General
