Setup, Diagnostic and Support Utilities
Software Guide 7–3
Identifying Setup Utility Controls
You must use the esc button
1
to access the Setup utility. You
may use the jog dial
2
to navigate within the Setup utility.
Identifying the esc button and the jog dial
Restoring the Setup Utility Defaults
To return all settings in the Setup utility to their default settings:
1. To open the Setup utility, turn on or restart the tablet PC.
While the Compaq logo is displayed and a cursor is flashing
in the upper right corner of the screen, press the esc button on
the tablet PC, or press
F10
on an optional keyboard.
❏
To change the language, select Advanced > Languages.
❏
To navigate and select without using an optional
keyboard, rotate the jog dial to scroll and press the jog
dial inward to select. To navigate and select using an
optional keyboard, use the arrow and
enter
keys.
2. Select the Exit menu > Load System Defaults.
3. On the Exit menu, select Exit Saving Changes.
When the tablet PC restarts, the default settings are in effect,
but all identification information, including ROM version
information, is current.
280125-001.book!!Page!3!!Sunday,!August!25,!2002!!3:51!PM
To Next Page
Loading...
Need help?
General
