6–4 Software Guide
Boot Order
To respond to a Network Service Boot prompt, use either of the
following methods:
■
Press the tab button on the tablet PC.
■
Press
F12
on an optional keyboard. To press
F12
on the
tablet PC keyboard, press
Fn+F11/F12.
To connect to the server during startup, you must respond to the
Network Service Boot prompt whether or not you have included
the NIC in a boot order preference.
To enable a NIC for startup, see “Setting a Boot Order Preference,”
earlier in this chapter.
280125-001.book!!Page!4!!Sunday,!August!25,!2002!!3:51!PM
To Next Page
Loading...
