Setup, Diagnostic and Support Utilities
Software Guide 7–11
Obtaining Configuration Information
1. To run the Compaq Diagnostics scan and open the Compaq
Diagnostics window, select Start > Control Panel >
Performance and Maintenance icon > Compaq Diagnostics.
2. Select Categories, then select a category from the list. The
information is displayed.
❏
To save the information, select File > Save As.
❏
To print the information, select File > Print.
3. To close Compaq Diagnostics, select File > Exit.
Obtaining Diagnostic Test Information
1. To run the Compaq Diagnostics scan and open the Compaq
Diagnostics window, select Start > Control Panel >
Performance and Maintenance icon > Compaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
❏
Quick Test runs a quick, general test on each device in a
selected category.
❏
Complete Test performs maximum testing on each device
in a selected category.
❏
Custom Test performs maximum testing on a
selected device.
◆
To run all tests for your selected device, select the
Check All button.
◆
To run only the tests you select, select the Uncheck
All button, then select the check box for each test
you want to run.
280125-001.book!!Page!11!!Sunday,!August!25,!2002!!3:51!PM
To Next Page
Loading...
Need help?
General
