To Next PageTo Next PageWhat does it mean if HP D6000 Disk Enclosure 7-segment display shows 12 = Enclosure thermal shutdown occurred?
If the 7-segment display on your HP Storage shows '12' indicating that an enclosure thermal shutdown has occurred, check for thermal issues within the D6000 drawer. Look for problems such as extremely hot drives, air blockages, missing or failed fans, or high ambient temperature.
Details the various components of the disk enclosure system.
Lists the essential tools needed for maintenance and replacement tasks.
Outlines critical safety precautions to follow before performing service procedures.
Provides steps to prevent damage to electronic components from static electricity.
Highlights important warnings and cautions for safe operation and handling.
Describes the procedure for safely powering down the D6000 enclosure.
Details the correct procedure for powering up the D6000 enclosure.
Instructions on how to extend the hard drive drawer for component access.
Procedures for handling and replacing hard drives within the enclosure.
Steps for removing and replacing the system fan.
Guide for removing and replacing hot-plug I/O modules.
Instructions for handling I/O module blanks.
Steps for removing and replacing the power supply unit.
Procedure for removing and replacing the power block assembly.
Detailed steps for removing and installing the hard drive drawer.
Troubleshooting steps for issues where the D6000 fails to power on.
Explains the meaning of different LED statuses for troubleshooting.
Deciphers 7-segment display error codes and their corresponding actions.
Guidance on identifying symptoms of hard drive failure.
Describes the consequences of a hard drive failing in different RAID configurations.
Explains issues related to compromised fault tolerance and potential data loss.
Procedures for recovering data when fault tolerance is compromised.
Important considerations before proceeding with hard drive replacement.
Explains the process of automatic data recovery after drive replacement.
Factors affecting the time taken for data rebuild operations.
Addresses issues arising from a second drive failure during a rebuild.
Identifies components located on the front panel of the enclosure.
Details how to access diagnostic cable connectors.
Describes the LEDs and buttons on the front panel.
Identifies components located on the rear panel of the enclosure.
Explains the LEDs and buttons on the rear panel.
Shows the numbering scheme for device bays.
Details the LEDs associated with hard drives.
Interprets combinations of hard drive LED states.
Lists operating and storage environmental parameters.
Provides physical dimensions and weight specifications for the storage array.
Defines common technical acronyms and abbreviations used in the document.
Instructions on how to provide feedback for documentation improvement.
Alphabetical listing of document topics with page references.
General