Note that you will get the same output if you run the omnidbsmis -ompasswd
command without the -list parameter.
-ompasswd -check [—host hostname]
Checks if the SMI-S CIMOMs were configured properly in the Data Protector
cell. It performs a health check of your environment, which may help identify
such potential problems as wrong user name or password provided, a broken
network connection, a DNS resolution problem, and so on. The -host option
is optional: if you enter a name of the host, the command will be run on the
specified host, otherwise it will be run on the local host. Note that HP
StorageWorks SMI-S Agent must be installed on the specified host.
-dgrules -init
Creates a template disk group pairs configuration file or overwrites an old one
with the new template. Note that only configured disk group pair rules are
overwritten.
-dgrules -put filename
Sets the EVA disk group pairs configuration file by reading the contents of the
input file, checking its syntax, and uploading the file to the SMISDB. If the syntax
of the file is inaccurate, the file is not uploaded.
-dgrules -get filename
Prepares the EVA disk group pairs configuration file for editing by reading the
contents of the file from the SMISDB and saving it under filename.
-dgrules -check EVA_WWN DG_name
Provides the information on the disk group that is in pair with the disk group
identified by the EVA_WWN and DG_name. The command returns the information
on the 1st disk group name, 2nd disk group name, and EVA WWN. If
there is no rule for the specified disk group, the first and the second disk groups
are the same.
-caconf -init
Creates a template EVA home configuration file or overwrites an old one with
the new template.
-caconf -put filename
Uploads the edited EVA home configuration file to the SMISDB. If the syntax of
the file is inaccurate, the file is not uploaded.
-caconf -get filename
Prepares the EVA home configuration file for editing by reading the contents of
the file from the SMISDB and saving it under filename.
-caconf -list EVA_name
Command line interface reference 115
To Next Page
Loading...
Need help?
General