Adds slots to the selected library. With ADIC/GRAU DAS or StorageTek ACS
libraries, this option adds volsers to the selected library. Make sure you use a
format supported by your library. For example, when adding slots to a SCSI
library, do not use letters or leading zeros.
-remove_slots LibraryName {Slot... | FromSlot-ToSlot...}
Removes slots from the selected library.
-silo_query LibraryName
Queries ACS/DAS server for the list of currently resident volsers and updates
the Data Protector repository of specified library. This option is not recommended
to be used with an ACS/DAS Server when querying logical libraries configured
for the same physical library. In such a case, use the -add_slots option to
add volsers manually.
With DAS Server, however, when logical libraries are not configured using Data
Protector, but using the DAS utilities, the Data Protector query operation can
safely be used on such libraries instead of adding volsers manually.
-silo_enter LibraryName
Moves ACS/DAS media from the CAP (ACS) or insert/eject area (DAS) to the
repository.
-cap CapID
ID of Control Access Port of ACS or insert/eject area of DAS library.
-silo_eject LibraryName {Volser... | FromVolser-ToVolser...}
Moves media from the ACS/DAS repository into the CAP.
-location Location
Specifies the new location for the ejected media. Only media with barcode will
be updated.
-enter LibraryName {Slot... | FromSlot-ToSlot...}
Moves media from the mail slots to the repository slots. This option is available
only for SCSI libraries.
-eject LibraryName {Slot... | FromSlot-ToSlot...}
Moves media from the repository slots into the mail slots. This option is available
only for SCSI libraries.
-group PoolName MagazineDescription Medium...
Creates a magazine MagazineDescription out of the specified non-magazine
media. Note that all specified media must be resident in the same SCSI library
at the time. The magazine is added to the pool PoolName which must be
configured to support magazines.
-ungroup MagazineDescription
164
To Next Page
Loading...
Need help?
General