-re-establish_links_before_restore
This option is used to synchronize split disks, that is, to move data to backup
disks. This is necessary to prepare the disks for restore and to enable accurate
restores. If the mirrored disks were split before the restore, and only some files
need to be restored, then this option can be used to update the backup system.
This will ensure that the correct data is resynchronized to the application system.
This option is not set by default.
-disable_disks
Disks on the application system are disabled, that is, the filesystems are
dismounted and volume groups are deactivated. This is performed before the
split. The disks are enabled after the links are restored. Note that only filesystems
selected for restore are dismounted. If other filesystems exist in the volume or
disk group, the stop/quiesce application command/script and restart application
command/script must be created to dismount these filesystems. You must always
select this option for restore when you want to move data from the backup to the
application system, that is, to incrementally restore links. The application system
disks have to be disabled to provide data integrity after the links are restored,
that is, data is moved.
-restore_links_after_restore
With this option enabled, the HP StorageWorks Disk Array XP agent incrementally
restores links for LDEVs that were successfully restored by Data Protector to the
backup system. The HP StorageWorks Disk Array XP agent also incrementally
re-establishes links for LDEVs that were not successfully restored by Data Protector
to the backup system.
GENERAL_OPTIONS
—device BackupDevice
Specifies the backup device where the backup medium is mounted.
-no_auto_device_selection
If this option is specified, Data Protector does not automatically replace
unavailable devices with available devices of the same device tag.
—server ServerName
Selects the Cell Manager with the client name ServerName as the Cell Manager.
Use this option to perform a restore to a client that is not in the current Data
Protector cell.
-target Client
Restores the selected fileset to the specified client.
-profile
Displays restore statistics.
232
To Next Page
Loading...
Need help?
General