• Configure or modify settings of a library or drive for given clients using the
information gathered during the scan of Data Protector clients.
• Remove drives on all or the specified clients from a library.
All sanconf sessions are logged to the file
Data_Protector_program_data\log\sanconf.log (Windows Vista, Windows
Server 2008), Data_Protector_home\log\sanconf.log (other Windows
systems), or /var/opt/omni/log/sanconf.log (HP-UX or Solaris systems).
OPTIONS
-version
Displays the version of the sanconf command.
-help
Displays the usage synopsis for the sanconf command.
-mom
Switches sanconf to operate in the MoM mode. This allows listing all devices
connected to a MoM environment (see -list) and to configure devices in cells
utilizing CMMDB (see - configure, -remove_hosts, -remove).
[-mom]-list[_devices][ListFileName]
This option scans Data Protector clients to gather information on SCSI addresses
of drives and robotic controls connected to the clients in the SAN environment
and lists the gathered information. The information is uploaded to the Media
Management Database on the Cell Manager. When ListFileName parameter
is specified, the information acquired during the scan of clients is saved to the
configuration file, which will be then used for configuring the library.
It is recommended to scan all clients that you want to configure, those that can
see the robotics and those that can see the drives.
Note: When the option -mom is specified, sanconf lists clients and devices of
all Data Protector cells in the MoM environment, even if they do not use CMMDB.
-hosts host_1 [host_2...]
Specify the -hosts option if you want to limit the sanconf actions only to
specified clients. Other clients in the Data Protector cell are skipped.
-hostsfile HostsFileName
Specify the -hostsfile option if you want to limit the sanconf actions only
to clients specified in the HostsFileName. Other clients in the Data Protector
cell are skipped. The HostsFileName is comprised of an ASCII list of clients,
one client per line. It is recommended that all clients are specified in the clients
list before you save the scan information to the configuration file.
394
To Next Page
Loading...
Need help?
General