Operations 30
4.
Install the PCI riser cage.
5. Install the access panel (on page 26).
6. Install the server into the rack ("Installing the server into the rack" on page 36).
7. Power up the server (on page 24, "Powering up and configuring the server" on page 37).
Install the full-length expansion board retainer
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 24).
3. Remove the access panel (on page 25).
4. Install the PCI riser cage (on page 29).
5. Install the full-length expansion board retainer.
6. Install the access panel (on page 26).
7. Install the server into the rack ("Installing the server into the rack" on page 36).
To Next Page
Loading...
