Table 5-4 Touchpad description and part number
Description Spare part number
Touchpad M10725-001
Touchpad cable (included in Cable Kit) M10736-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the bottom cover (Bottom cover on page 22).
3. Remove the battery (see Battery on page 23).
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Remove the protective shielding from the top of the touchpad.
3. Remove the six Phillips M2.0 × 2.0 screws (2) that secure the touchpad to the computer.
4. Remove the touchpad from the computer (3).
Reverse this procedure to install the touchpad.
Speakers
To remove the speakers, use this procedure and illustration.
Table
5-5 Speaker description and part number
Description Spare part number
Speaker Kit for use in models without WWAN M10724-001
Speaker Kit for use in models with WWAN M10723-001
26 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
