HP Elite C1030 Chromebook - Power Button

1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the bottom cover (Bottom cover on page 22).
3. Remove the battery (see Battery on page 23).
4. Remove the system board (see System board on page 31).
Remove the volume button:
1. Use tweezers to release the right (1) and left (2) sides of the button.
2. Remove the volume button from the computer (3).
Reverse this procedure to install the volume button.
Power button
To remove the power button, use this procedure and illustration.
Table
5-13 Power button description and part number
Description Spare part number
Power button (included in the Button Kit) M11033-001
Before removing the power button, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the bottom cover (Bottom cover on page 22).
3. Remove the battery (see Battery on page 23).
4. Remove the system board (see System board on page 31).
Remove the power button:
1. Use tweezers to release the right (1) and left (2) sides of the button.
Component replacement procedures 37