Table 5-11 USB door description and part number
Description Spare part number
USB door, left M00444-001
USB door, right M00445-001
Before removing the USB door, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the bottom cover (Bottom cover on page 22).
3. Remove the battery (see Battery on page 23).
4. Remove the system board (see System board on page 31).
Remove the USB door:
▲ Use a at tool to lift and release the USB door from the system board.
To replace USB door, place the door on top of the connector and press down until it snaps into place.
Volume button
To remove the volume button, use this procedure and illustration.
Table
5-12 Volume button description and part number
Description Spare part number
Volume button (included in the Button Kit) M11033-001
Before removing the volume button, follow these steps:
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
