Table 5-8 Sensor board description and part number
Description Spare part number
Sensor (IR) board M10722-001
Sensor board cable (included in Cable Kit) M10736-001
Before removing the sensor board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the bottom cover (Bottom cover on page 22).
3. Disconnect the battery cable from the system board (see Battery on page 23).
Remove the sensor board:
1. Disconnect the sensor board cable from the ZIF connector on the system board (1).
2. Remove the sensor board from the computer (2).
Reverse this procedure to install the sensor board.
System board
To remove the system board, use these procedures and illustrations.
Table
5-9 System board descriptions and part numbers
Description Spare part number
Intel Core i7-10610U processor and 16 GB of system memory (models with WWAN) M25776-001
Intel Core i7-10610U processor and 8 GB of system memory (models with WWAN) M25775-001
Intel Core i7-10610U processor and 16 GB of system memory (models without WWAN) M10751-001
Intel Core i7-10610U processor and 8 GB of system memory (models without WWAN) M10749-001
Component replacement procedures 31
To Next Page
Loading...
