4. Remove the battery from the computer (5).
To insert the battery, reverse the removal procedures.
RTC battery
To remove the RTC battery, use this procedure and illustration.
Table 6-2 RTC battery description and part number
Description Spare part number
RTC battery L13694-001
Before removing the RTC battery, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 32).
2. Remove the bottom cover (see Bottom cover on page 32).
3. Remove the battery (see Battery on page 42).
Remove the RTC battery:
1. Disconnect the battery cable from the system board (1).
44 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
