4. Remove the PM2.5×4.0 screw (3) from the battery bay.
5. Turn the computer right-side up, with the front toward you and open as far as possible.
6. Disconnect the display panel cable (1) from the system board. The display panel cable is available
using spare part number 495607-001 for DreamColor LED models, 494005-001 for LCD models.
7. Disconnect the microphone cable (2) from the system board.
8. Remove the wireless antenna cables from the clips (1) and routing channels built into the top cover.
Component replacement procedures 71
To Next Page
Loading...
