Inserting a SIM card (select products only)
IMPORTANT: Inserting a SIM card of the wrong size could damage the SIM card or cause the SIM card to
become stuck in the slot. The use of SIM card adapters is not recommended. To prevent damage to the SIM
card or the connectors, use minimal force when inserting or removing a SIM card.
NOTE: Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for
your computer:
1. Go to http://www.hp.com/support, and then search for your computer by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.
To insert a SIM card, follow these steps:
1. Turn o the computer by using the Shut down command.
2. Press in on the SIM card tray, and then remove it from the slot.
3. Insert the SIM card into the SIM card tray (1), and then replace the tray in the computer. Press gently on
the tray (2) until it is rmly seated.
NOTE: The SIM card in your computer may look slightly dierent from the illustration in this section.
To remove a SIM card, reverse these steps.
Inserting a SIM card (select products only) 17