NFC module
Table 5-8 NFC module description and part number
Description Spare part number
NFC module
NOTE: The NFC module spare part kit does not include the NFC board cable. The NFC module cable is
included in the Cable Kit, spare part number L70755-001. The NFC antenna is available as spare part
number L70753-001.
L02249-001
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Disconnect all external devices from the computer.
3. Remove the bottom cover (see Bottom cover on page 29).
4. Remove the battery (see Battery on page 31).
Remove the NFC module:
1. Disconnect the NFC cable from the ZIF connector on the NFC module (1).
2. Disconnect the antenna cable from the ZIF connector on the NFC module (2).
3. Use a tool to release the NFC module from the adhesive that secures it to the computer (3), and then
remove the NFC module from the computer (4).
Reverse this procedure to install the NFC module.
Component replacement procedures 39
To Next Page
Loading...
