Solid-state drive
Table 5-3 Solid-state drive description and part number
Description Spare part number
2 TB, PCIe, NVMe, TLC L31877-001
1 TB, PCIe, NVMe, TLC L31874-001
512 GB, PCIe, NVMe, TLC L31879-001
512 GB, PCIe, NVMe, self-encrypting drive (SED), OPAL 2, TLC L31880-001
512 GB, PCIe, NVMe, value L76713-001
512 GB, PCIe, NVMe + 32 GB Optane memory L76714-001
256 GB, PCIe, NVMe, TLC L31875-001
256 GB, SATA-3, self-encrypting drive (SED), OPAL 2, TLC L31881-001
256 GB, PCIe, NVMe, value L31876-001
256 GB, PCIe, NVMe + 16 GB Optane memory L79586-001
128 GB, SATA-3, TLC L31873-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 29).
3. Remove the battery. (see Battery on page 31).
Remove the solid-state drive:
1. Remove the tape from the solid-state drive (1).
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
