Display assembly
Table 5-12 Display description and part number
Description Spare part number
Display assembly (full hinge-up), FHD, antiglare L70759-001
Display assembly (full hinge-up), FHD, antiglare (privacy) L70760-001
Display assembly (full hinge-up), FHD, BrightView L70761-001
Display assembly (full hinge-up), FHD, BrightView (privacy) L70762-001
Display assembly (full hinge-up), UHD, BrightView L70763-001
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 29).
3. Remove the battery (see Battery on page 31).
4. Remove the audio jack board (see Audio jack board on page 40).
5. Remove the system board (see System board on page 41).
Remove the display assembly:
1. Disconnect the two display cables from the system board (1).
2. Disconnect the antenna cables from the WLAN module and WWAN module (select products only) (2).
3. Remove the six Phillips M2.0 × 5.0 screws (3) that secure the display hinges to the computer.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
