Solid-state drive
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
2 TB, PCIe, NVMe, TLC L60460-001
1 TB, PCIe, NVMe, TLC L60457-001
512 GB, PCIe, NVMe, TLC L60463-001
512 GB, PCIe, NVMe, TLC, self-encrypting drive (SED), Opal 2 L60462-001
512 GB, SATA-3. TLC, FIPS 140-2 L60461-001
256 GB, PCIe, NVMe, TLC L60458-001
256 GB, PCIe, NVMe, value L60459-001
256 GB, SATA-3, TLC, Opal 2 L60464-001
128 GB, SATA-3, TLC L60456-001
Solid-state EMI shield (included in Bracket Kit) L56447-001 (Bracket Kit)
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 30).
2. Remove the bottom cover (see Bottom cover on page 31).
3. Remove the battery (see Battery on page 33).
Remove the solid-state drive:
1. Lift the EMI shield that covers the solid-state drive.
TIP: Clips on the system board secure the EMI shield. When installing the shield, be sure to insert the
shield into the clips.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
