Memory module
Table 5-6 Memory descriptions and part numbers
Description Spare part number
16 GB memory module 937438-852
8 GB memory module 937236-852
4 GB memory module L10598-852
Memory module EMI shield (included in Bracket Kit) L56447-001 (Bracket Kit)
Before removing the memory modules, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 30).
2. Remove the bottom cover (see Bottom cover on page 31).
3. Remove the battery (see Battery on page 33).
Remove the memory modules:
1. Remove the two Phillips M2.0 × 3.0 screws (1) that secure the memory module EMI shield to the
computer.
2. Remove the shield from the computer (2).
TIP: Clips on the system board secure the bottom edge of the EMI shield. When installing the shield, be
sure to insert the bottom edge of the shield into the clips.
3. Spread the two retention clips outward (1) until the memory module tilts up at a 45-degree angle.
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
